subminiature t-3/4 led diffused and clear lamps .010 (.26) .002 (.06) .056 (1.44) .048 (1.24) .024 (.6) .016 (.4) .091 (2.3) .083 (2.1) .020 (.5) .012 (.3) .276 (7.0) min .058 (1.48) .050 (1.28) .087 (2.2) .079 (2.0) .031 (.78) .023 (.58) cathode mark (color stripe on side of package) .075 (1.9) .063 (1.6) dia package dimensions high eff. red hlmp-6305a water clear mv6700a red diffused yellow hlmp-6405a water clear mv6300a yellow diffused green hlmp-6505a water clear mv6400a green diffused aigaas red hlmp-q105a water clear hlmp-q150a red diffused notes: all dimensions are in inches (mm). description these t-3/4 subminiature led lamps feature a square-base, transfer molded package for surface mount applications. a tinted diffused or water clear epoxy lens ? ? available in aigaas red, high-efficiency red, green, and yellow ? ? produces wide-angle beam emission and sharp on/off contrast. they are available with gullwing lead bends for top mounting, as well as yoke lead bends and z-bends for mounting to the back of a pcb. features ? subminiature t-3/4 transfer molded ? low package profile ? axial leads ? wide viewing angle ? smt versions parameter hlmp-6305a hlmp-6405a hlmp-6505a hlmp-q105a units mv6700a mv6300a mv6400a hlmp-q150a power dissipation 135 85 135 85 mw average forward current 30 20 30 30 ma peak forward current (1 s pulsewidth, 0.1% df) 90 60 90 300 ma lead soldering time at 260 c 5555sec operating temperature -55 to +100 -55 to +100 -50 to +100 -20 to +100 c storage temperature -55 to +100 -55 to +100 -50 to +100 -20 to +100 c absolute maximum rating (t a =25c) ? ? 2001 fairchild semiconductor corporation ds300000 2/27/01 1 of 5 www.fairchildsemi.com
subminiature t-3/4 led diffused and clear lamps part number qtlp- mv6700a mv6300a mv6400a hlmp-q150a condition luminous intensity (mcd) i f = 10ma minimum 1.0 1.0 1.0 1.0* typical 3.0 3.0 3.0 1.8* *tested at i f = 1ma forward voltage (v) i f = 10ma maximum 3.0 3.0 3.0 1.8* typical 1.8 2.0 2.0 1.6* *tested at i f = 1ma peak wavelength (nm) 635 585 565 660 i f = 10ma spectral line half width (nm) 40 36 28 20 i f = 10ma reverse voltage (v) 5 5 5 5 i r = 100 a viewing angle () 50 50 50 50 i f = 10ma electrical / optical characteristics (t a =25c) part number qtlp- hlmp-6305a hlmp-6405a hlmp-6505a hlmp-q105a condition luminous intensity (mcd) i f = 10ma minimum 3.0 3.0 3.0 20.0** typical 12.0 12.0 12.0 50.0** **tested at i f = 20ma forward voltage (v) i f = 10ma maximum 3.0 3.0 3.0 2.4** typical 1.8 2.0 2.0 1.8** **tested at i f = 20ma peak wavelength (nm) 635 585 565 660 i f = 10ma spectral line half width (nm) 40 36 28 20 i f = 10ma reverse voltage (v) 5 5 5 5 i r = 100 a viewing angle () 25 25 25 25 i f = 10ma electrical / optical characteristics (t a =25c) www.fairchildsemi.com 2 of 5 2/27/01 ds300000
relative intensity fig. 3 relative intensity vs. peak wavelength 1.0 0.5 0 500 550 600 650 700 750 90 i f - forward current (ma) v f - forward voltage (v) wavelength (nm) fig. 1 forward current vs. forward voltage 40 50 60 70 80 30 20 10 0 1.0 2.0 3.0 4.0 5.0 i f - dc forward current (ma) relative lumnous intensity (normalized at 10 ma) fig. 2 relative luminous intensity vs. dc forward current 2.5 2.0 1.5 1.0 0.5 0.0 0 5 10 15 yellow green algaas red her her algaas red her yellow green algaas red green yellow typical performance curves (t a =25c) subminiature t-3/4 led diffused and clear lamps ds300000 2/27/01 3 of 5 www.fairchildsemi.com
subminiature t-3/4 led diffused and clear lamps optional configurations .024 (.6) .016 (.4) .091 (2.3) .083 (2.1) .020 (.5) .012 (.3) .087 (2.2) .079 (2.0) .154 (3.90) .148 (3.75) .033 (.82) .000 (.00) .016 (.4) .008 (.2) cathode anode .078 (1.9) .063 (1.6) .058 (1.48) .050 (1.28) .115 (2.92) .099 (2.52) .039 (1.0) .028 (.7) .010 (.26) .002 (.06) gullwing lead configuration notes: all dimensions are in inches (mm) description these subminiature solid state lamps are transfer molded in an axial lead package. they are available in yellow, green, high effi- ciency red and aigaas red in both diffused and water clear lens. automatic placement equipment can be used to mount the leds on the pc board. the lamps can be mounted using either batch or in line vapor phase reflow solder processes. features ? available in gullwing, yoke and z-bend lead formings ? compatible with automatic placement equipment ? compatible with vapor phase reflow soldering processes ? long life ? ? solid state reliability ? reel and tape or bulk packaging available .058 (1.48) .050 (1.28) .048 (1.22) .032 (.82) .300 (7.62) max .091 (2.3) .083 (2.1) .024 (.6) .016 (.4) .087 (2.2) .079 (2.0) .020 (.5) .012 (.3) cathode anode .115 (2.92) .099 (2.52) .078 (1.9) .063 (1.6) .117 (2.96) .100 (2.56) .047 (1.2) .031 (0.8) .010 (.26) .002 (.06) .033 (.85) .026 (.65) yoke lead configuration .087 (2.2) .079 (2.0) .058 (1.48) .050 (1.28) .024 (.6) .016 (.4) .020 (.5) .012 (.3) .091 (2.3) .083 (2.1) .189 (4.8) .173 (4.4) cathode anode .240 (6.1) .232 (5.9) .078 (1.9) .063 (1.6) .128 (3.24) .112 (2.84) .039 (.99) .023 (.59) .033 (.85) .026 (.66) .010 (.26) .002 (.06) .034 (.86) .026 (.66) z-bend lead configuration www.fairchildsemi.com 4 of 5 2/27/01 ds300000
disclaimer fairchild semiconductor reserves the the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. subminiature t-3/4 led diffused and clear lamps 2. a critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ds300000 2/27/01 5 of 5 www.fairchildsemi.com
|
